What the WA300-BAL is—and what it isn't
- Is the WA300-BAL a headphone amp or a speaker amp?
- It's an integrated loudspeaker amplifier: Class-A, fully balanced, all-tube, with 25 watts per channel into 4 or 8 ohms. The ABYSS Headphone Edition bundles a Superconductor 4-pin XLR female to stereo banana speaker plugs adapter so you can connect ABYSS headphones to the speaker outputs. The adapter is the bridge, not a dedicated headphone circuit.
- Which ABYSS headphones does Woo Audio mention?
- The catalog overview names the ABYSS AB1266 TC and the ABYSS Diana TC Signature as headphones that work with this amplifier. It doesn't list other models, so treat those as the confirmed pairings in the supplied information.
- What does the bundled adapter actually do?
- It converts a 4-pin XLR headphone plug to stereo banana plugs that fit the amplifier's WBT-0710Cu speaker binding posts. That means you connect the headphones to the same outputs you'd use for speakers.
Why a 25W speaker amp can make sense for ABYSS headphones
The WA300-BAL is built around 300B power tubes, which Woo Audio describes as producing an organic, warm tone. The driver stage uses a passive STEP-UP driver for the first gain stage and a pair of 6SN7 dual-triode tubes for the second. The amplifier runs zero feedback and uses custom output transformers.
For headphone use, the practical appeal is headroom and a particular tube voicing rather than a specific power target. The catalog does not state a recommended power output for the AB1266 TC or Diana TC Signature, so the honest position is that the amplifier provides 25W per channel and the adapter makes the connection possible; whether that translates into a preferred sound is a personal judgment, not a guaranteed improvement.
Specifications that affect system matching
- Woo Audio WA300-BAL Power Amplifier ABYSS Headphone Edition: Class-A, fully balanced, all-tube design with in-house custom output transformers, zero feedback, and 25 watts per channel. These are the core electrical facts. The 25W rating is into a speaker load, so headphone use depends on the adapter and the headphone's own characteristics.

Woo Audio WA300-BAL Power Amplifier ABYSS Headphone Edition - Woo Audio WA300-BAL Power Amplifier ABYSS Headphone Edition: Output impedance can be switched between 8 Ohms and 4 Ohms via the front left dial; independent 4 or 8 Ohm speaker outputs use WBT-0710Cu binding posts. With the adapter, the same speaker outputs feed the headphones. You'll want to understand which setting suits the load you connect, and the catalog does not give a headphone-specific recommendation.
- Woo Audio WA300-BAL Power Amplifier ABYSS Headphone Edition: Three analog inputs: two XLR and one WBT RCA, selectable via the front right dial. That's enough for a balanced DAC plus a single-ended source. There is no digital input, so the WA300-BAL needs an external DAC or preamp stage.
- Woo Audio WA300-BAL Power Amplifier ABYSS Headphone Edition: Dual motorized volume control allows independent left and right channel adjustment; a matching aluminum remote is included. Independent channel volume can help dial in a soundstage, but it also means you need to be careful when setting levels—especially with headphones.
Setup and compatibility questions
- What cables come in the box?
- The catalog explicitly notes that an AC power cord and audio cables are not included. The Superconductor headphone adapter is included in the ABYSS Headphone Edition bundle. You'll need to supply your own power cord and source cables.
- Can I connect both speakers and headphones at once?
- The amplifier has one set of speaker binding posts, and the adapter uses those same posts. The supplied information does not describe a speaker/headphone selector switch. If you need to switch between speakers and headphones, that's a separate accessory decision—the catalog lists a speaker selector cable bundle option, but doesn't detail its operation.
- Does the WA300-BAL have protection for tube faults?
- Yes. The catalog lists soft-start, faulty-tube detection and protection, and automatic open-circuit protection with an integrated dummy load that absorbs up to 2,000W into 8 ohms or 1,000W into 4 ohms during a fault.
- How much space does it need?
- The chassis without tubes measures 380mm wide, 116mm high, and 510mm deep. With tubes installed, height is approximately 230mm. The amplifier weighs 40 lbs (18 kg). Plan for ventilation around the tubes and a sturdy shelf.
Standard vs Premium package and bundle options
The variant list shows two tube packages and optional power-cable and speaker-selector bundles. The catalog does not specify which tubes differ between Standard and Premium, so the choice rests on the price difference and your confidence in the tube set.
- Standard Package: Base configuration with the standard tube selection. Choose this if you want the amplifier and adapter without add-on cables.
- Premium Package (+$3000 USD): A higher-priced tube selection. The supplied information does not detail the specific tubes, so ask before assuming a particular upgrade.
- Power cable bundle: Optional Kaptovator Lite 2.0m (save $750) or Kaptovator Ultra 2.0m (save $1500) power cables. Since no AC cord is included, a bundle can be a practical way to complete the setup.
- Speaker selector bundle: Optional WA-P1000 Platform and 1' Super V Speaker cable (save $1800). This is relevant only if you also plan to use the amplifier with speakers.
Practical ownership questions
- Is the WA300-BAL a good first tube amplifier?
- It's a substantial, heavy integrated amplifier with high-voltage 300B tubes. The catalog emphasizes a simple circuit and protection features, but it does not provide operating instructions or safety procedures. If you're new to tube gear, factor in the learning curve and the need for ventilation and careful cable management.
- Will it drive difficult headphones?
- The catalog does not publish headphone-specific power or output-impedance figures. The confirmed headphone pairings are the AB1266 TC and Diana TC Signature. For other headphones, check the impedance and sensitivity against the amplifier's speaker-output specifications—and remember the adapter is part of the signal path.
- What source should I pair with it?
- You'll need a DAC or preamplifier with XLR or RCA outputs. The WA300-BAL has no digital inputs and no headphone-specific gain switch, so source output level matters. A balanced DAC into one of the XLR inputs is the most direct path.

