Back to Blog
How-to Guides 2026-11-20 ABYSS Headphones Premium High-End Luxury Audio 0 views

Stillpoints Mini Ultra Isolation Feet: Installation Guide

Stillpoints Mini Ultra Isolation Feet: Installation Guide

Learn how to install Stillpoints Mini Ultra Isolation Feet on equipment with a 1/4\"-20 threaded insert. Includes height specs, mounting tips, and compatibility notes.

What the Stillpoints Mini Ultra Isolation Feet Are Made For

The Stillpoints Mini Ultra Isolation Feet are stainless steel, adjustable footers designed to provide a stable foundation and reduce noise transfer for audio equipment. They are sold in sets of four, enough for one speaker or one stand. Each foot screws directly into a 1/4\"-20 threaded insert, making them a direct fit for StackZilla stands or any component with that standard thread.

Installation Steps

The supplied information confirms the footers include a plastic wrench for installation and height adjustment. Follow these steps for a secure setup.

  1. Check your equipment for a 1/4\"-20 threaded insert: The Mini Ultra feet are designed to screw into a threaded 1/4\"-20 hole. They do not include a top piece for mounting to a flat surface, so the equipment must have the matching threaded insert.
  2. Prepare the feet and wrench: Each set contains four feet and one plastic wrench. The foot body height is 0.9 in (23 mm), plus a 0.4 in (10 mm) threaded stud. Use the plastic wrench to turn the foot—do not use metal tools that could damage the threads.
  3. Screw each foot into the threaded insert: Align the threaded stud of the foot with the 1/4\"-20 hole on your equipment. Turn clockwise by hand until snug, then use the plastic wrench for final tightening. Avoid over-tightening.
  4. Adjust height and level the equipment: The plastic wrench allows fine height adjustment. Turn each foot equally to keep the component level. The feet are adjustable, so you can compensate for uneven surfaces.

Key Specifications at a Glance

  • Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount: Foot body height: 0.9 in (23 mm), plus 0.4 in (10 mm) threaded stud length. Thread: 1/4\"-20. These dimensions confirm the feet fit into a standard 1/4\"-20 threaded insert and provide a low-profile isolation solution.
    Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount
    Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount
  • Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount: Includes plastic wrench for installation and height adjustment. Sold in sets of 4 only. The wrench ensures proper installation without damaging the stainless steel finish, and the set size matches single-speaker or single-stand needs.
  • Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount: Note: these footers do not include a top piece for mounting to a flat surface; they are designed to screw into a threaded 1/4\"-20 hole. This means the feet are not for placing under flat-bottomed components—they require a threaded insert to attach securely.

Compatibility and Limitations

The Stillpoints Mini Ultra Isolation Feet are specifically for equipment with a 1/4\"-20 threaded insert. They are confirmed compatible with StackZilla stands, and any speaker or component with that thread. They are not designed for flat surfaces without a matching insert. The supplied information does not specify load capacity or recommended torque; use the plastic wrench and tighten by feel until the foot is snug.

Related Articles

Customer Service
Home
Products
Cart
Profile